Motorcycle suspensions, sales, racing, repair and Service in Ahoskie, St. Johns and Roanoke Rapids North Carolina NC
Motorcycle suspensions, sales, racing, repair and Service in Ahoskie, St. Johns and Roanoke Rapids North Carolina NC
343 NC Hwy 42 W Ahoskie, NC 27910 / (252) 862-8005
Cerakote is a Ceramic Coating applied to Parts
Our Coating is Done in House
You can either come and drop parts or mail in!
CLEAN YOUR PARTS BEFORE YOU SHIP OR DROP!
Save yourself some money by sending or bringing in clean parts.
Soap and water can save you $$$s off us doing the cleaning!
If you send two or more parts – dirty calipers, cases, master cylinders etc… you will be charged additional costs! Must be grease and oil free! Please don’t make us wash your parts. Scrub them real good! Save time & money on your turnaround time! You don't want to pay us for something you can do!
Media Blasting (Sandblasting) of the parts is included in our cost. Its better to let us do the blasting to keep oil and contaminants from damaging the parts. We use a specific media that keeps a nice finish. The most common media’s sold are to coarse. The finish will lack the desired effect if you use the incorrect process for this application.
Pricing:
-
$250 – Pair of Hubs – $20 fee for bearing and seal removal/installation if needed.
-
$125 – Engine Cases each side – $25 fee bearing seal removal/installation if needed.
-
$150 – Triple Clamps - Add $40 if we remove bottom bearing.
-
$100 – 4 Stroke Heads.
-
$80 - 2 Stroke Heads.
-
$55 – Clutch/ignition cover, 2 stroke & 4 stroke cylinders (outer covers wear from boots like any coating
-
$75 – Valve Covers
-
$55 – Calipers, rear brake hanger, water pump cover
-
$50 – Master cylinder (must have sight glass delete mod $50, or sight glass replacement $35), front brake hanger, 2 stroke heads
-
$35 - Cleaning fee if parts come dirty. Clean all oils and dirt with soapy water – see above!
-
Any misc parts are a $50 minimum due to prep and materials.
